PRODUCT INFORMATION GUIDE

    Last Updated: June 07, 2018

    SCOUT SECURITY, INC.

    This informational guide contains important instructions on safety, handling, disposal, recycling, regulatory information and the limited hardware warranty for your Scout Alarm device. The latest user instructions and any updates to this informational guide can be found at: scoutalarm.com/product-information-guide

    Important Operating and Safety Instructions

    • Read all safety and operating instructions before using your Scout Alarm hardware to avoid injury. Keep these instructions somewhere where you can find them for future reference. Heed all warnings contained herein.
    • This product is not intended to be used to control or monitor, directly or indirectly, industrial equipment or medical equipment of any kind.
    • Do not install your device outdoors or near water, or expose the product to any water or liquid of any kind.
    • Many of Scout's devices operate on battery power. Battery-powered detection sensors will not operate and your alarm will not sound if the batteries are low or dead. Monitor your device's battery level often to ensure proper operation.
    • Use a dry cloth to clean your Scout device. Do not use liquids of any kind. Exposure to liquids, detergents, or abrasive cleaners may scratch your device and could affect performance.
    • Do not install your Scout device near any heat sources. Stoves, radiators, registers and other heat producing devices can cause damage that may affect performance.
    • Only install your Scout devices in accordance with the installation instructions provided to you. Improper installation may result in poor performance. Scout is not responsible for damages resulting from the improper installation of devices by the user.

    Operating & Storage Environments:

    Operating: 32℉ to 104℉ Storage: -4℉ to 140℉

    Recycling and Disposal


    The above symbol on your Scout device and the device's packaging is in accordance with the European Union's Waste Electrical and Electronic Equipment (WEEE) Directive. In accordance with WEEE, your Scout device should be disposed of or recycled of separately from normal household waste. The end user is responsible to dispose of this product by taking it to a WEEE-designated facility. Separately collecting and recycling waste equipment will help conserve natural resources, protect overall health and the environment. Please contact your local environmental office, an electronic waste disposal company or the vendor from which you purchased this device for more information about recycling.

    Certifications and Regulatory Compliance

    This device has undergone FCC, CE, and PTCRB compliance testing.

    FCC Compliance Statement:

    This devices complies with FCC standards for home or office use and with Part 15 of the FCC Rules. Operations of this device is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and the receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

    Warning to the user:

    Changes or modifications to the product not expressly approved by Scout Security, Inc. could void your right to use or operate your product.

    Where shielded interface cables or accessories have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC limits.

    This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures.

    Canada Compliance Statement

    This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

    Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est aurorisee aux deux conditions suivantes: 1) l'appareil ne doit pas produire de brouillage, et 2) l'utilisateur de l'appareil doit accepter toute brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.

    This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures.

    Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur.

    IC Radiation Exposure Statement

    This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

    Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.

    Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

    Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

    This radio transmitter (IC:12325A-SCHUB01 / IC:12325A-SCEPD01 / IC:12325A-SCWAD01 / IC: 12325A-SCMOT01) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

    Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

    Antenna List

    Antenna list

    European Compliance Statement

    eu compliance
    A copy of the EU declaration of Conformity is available at: scoutalarm.com/legal

    Service and Support

    Except for its battery, your Scout device does not contain any user-serviceable parts. If you need service, contact Scout at one of the numbers below. Helpful information is also available on our website at: scoutalarm.com/support

    Toll-Free Within the United States: 1-844-AT-SCOUT (287-2688)
    Outside the United States: use the number above, carrier charges apply - please contact your telecom service provider for details

    The hours our customer support is available may be found at: scoutalarm.com/support

    Scout's Address:
    Scout Security Inc.
    210 N. Racine Ave
    STE 2M
    Chicago, IL 60607